@ghamrawyk you know what, now that you mention it I've never had an issue with this when running via a Linux cluster. So it very well be a bug with Wi...

Hi @bmad, I mean, if you have the data to replicate the airbags, you can create the same loading scenario via inflating airbags and adding contacts...

@ana I've seen this too but, honestly, I'm not sure I ever resolved it. Is the rigid surface or beam the slave side?

My bad @marso1 for not responding immediately. Double precision is determined through a different ls-dyna solver file which has a "_d_" instead of "_s...

Hi @ana, @icebreakersours is laying down some fundamental FEA advice. A lot really comes down to your understanding of what "should be normal" in y...

@kingoz79 good to hear you got the geometry created via Pre-Post. The tie-constraint equivalent in LS-Dyna could either be accomplished through *Co...

Hi @kingoz79, I know what you are asking, but could I ask what type of application your question is regarding to? If you just want to know how much...

@kingoz79 I believe you can do what you want by creating a separate rigid part with a shell element on the face of the solid element where you want to...

@gdmarinv weird. Can you confirm that your elements are showing up correctly via the Keyword tab?

Hi @anuragdogra, Good to hear that you got your simulation working. Another thing to keep in mind: try to prevent using multiple element types in a...

@ghamrawyk have you tried running an SMP version of dyna on your local computer? MPP is usually reserved for clusters/HPC where you have many differen...

Hi @anuragdogra, If the files are the exact same between the local and cluster/HPC simulation, then it might be something to do with the cluster an...

Hi, I have your post marked as private. I need you to change your username though before I can approve any of your posts.

@rybask1 I was thinking similar to @icebreakersours. Try saving the model as a single file (without include files) and run it and see if you are still...

Hi @lsdynauser0815, What version of Dyna are you using?