SPG Section not wor...
 
Notifications
Clear all

SPG Section not working

2 Posts
2 Users
0 Likes
1,228 Views
Posts: 2
Topic starter
(@willjust)
Barista
Joined: 4 years ago

I am trying to run an example file from LSTC with an SPG section. I get the below error every time. When I change the section from SPG to a normal solid, everything works. Any help?

 initialization completed
forrtl: severe (157): Program Exception - access violation
Image PC Routine Line Source
lsdyna_sp.exe 00007FF7A6372AC1 FEM3D 1570 fem3d.F
lsdyna_sp.exe 00007FF7A636F63F SOLTN 370 fem3d.F
lsdyna_sp.exe 00007FF7A2204488 OVERLY 248 dyn0.F
lsdyna_sp.exe 00007FF7A6BAC479 LSDYNA1 766 dynm.F
lsdyna_sp.exe 00007FF7A6BADA03 MAIN__ 1634 dynm.F
lsdyna_sp.exe 00007FF7A9706C6E Unknown Unknown Unknown
lsdyna_sp.exe 00007FF7A99E97F4 Unknown Unknown Unknown
KERNEL32.dll 00007FFEDCF17BD4 Unknown Unknown Unknown
ntdll.dll 00007FFEDD18CE51 Unknown Unknown Unknown
1 Reply




Negative Volume
Posts: 639
Admin
(@negativevolume)
CEO
Joined: 5 years ago

Hi @willjust

I know this is 5 months late but if you ever have issues with "forrtl:severe (157): Program Exception - access violation" try running the simulation with double precision. This is in the name of the version of ls-dyna labeled as "_d_" and comes after _smp_ or _mpp_. If that doesn't help then you can try a newer version of dyna or check that there are no issues with the contacts in your simulation. 

https://www.dynasupport.com/howtos/general/double-precision

Reply







Share: