This error occurs when all points in your curve matching comparison are outside the specified range. This typically happens due to one of these common...

Here’s a simplified example of how to set up a simulation of a sinusoidal wave using LS-DYNA.Example: Simulating a Sinusoidal Wave in LS-DYNA1. Define...

Simulating isolated waves in LS-DYNA can be a complex task, but here’s a general outline to get you started:1. Define the Problem- Determine the type ...

Yes, there are several approaches in HyperMesh to deform an existing mesh to match new geometry. Here are the main methods:1. Using Morphing: Geomet...

The red points in HyperMesh's aerospace toolbox typically indicate incomplete or failed fastener creation. Let me help you troubleshoot:Common causes ...

Let me help you troubleshoot this plasticity convergence issue with MAT133 and kinematic hardening. This is a complex problem that can arise from seve...

This is a common issue in OptiStruct when dealing with shell elements and mass matrices. Let me explain the situation and provide some potential solut...

Let me help break this down. The apparent paradox you're observing between oscillating stress and monotonic strain in LS-DYNA's output requires unders...

I understand you're working on calculating the global mass and stiffness matrices for a 3D object represented by a grid of cuboids. This is a common p...

To access state variables in the WKSLP subroutine in MSC Marc, there are a few approaches, but using common blocks is indeed one of the most common an...

@negativevolume Wow I didn't know that webpage existed, thanks! That's actually pretty useful.