Hi @macsnail, I'm actually not sure how to do this but I'm looking into it. I know people who have done this through things like Matlab where they de...

Hi @nicolepac, Assuming that the node ids are the same before and after morphing, it should be relatively easy to calculate the distance before and a...

@sonlong Like @if4ou said, a force transducer is only for designating a specific region of a contact to output results for. You must have a constraint...

@sonlong What type of contact are you using?

@sonlong First off, does the contact between the beam and ground appear to be working?

Hi @thain, The issue that you are running into is that the mesh between those parts is not connected. Two elements can be in the same part but if the ...

Hi @if4ou Honestly, I was never able to fully understand how the color map in Paraview worked. I think it is more targeted for coloring static fringe ...

@nicolepac Correct, so you want to mesh 1 step and use the other as the other step as the target to morph the mesh to. Before that though, you want t...

Hi @nicolepac What you are trying to accomplish is commonly called Morphing. There are many ways to do this, one of the most common being a thin plate...

Hi @n-visnuram Sorry for the delay in getting a response for you. Could you try and activate the option 3 in the *Database_Ascii which will write you ...

Hi @acad222 You may have found this by now, but there are some good examples here for metal forming

Hi @mahdi_o, This seems like a pretty complex problem. I think you may have to model it as Fluid-Structure Interaction (FSI) which is not what your go...

Hi @arun9660, The static and dynamic friction coefficients define how easily (or difficult) the slave and master side of the contact slide across one ...

Hi @csuznxg I have to be honest, I am not familiar with this type of analysis and don’t know how much I will be of help. I may be able to help concept...

@sumit007 Sorry, it should be addressed. There are spam controls that prevent attachments occasionally, it should work now.